Eaton Power Xpert Gateway Minislot, Quick Start Instructions

Page: 18 / 26

14 Eaton PXGMS Card Quick Start Instructions P-164000208—Rev 06
R Reeggiisstteerr aa P Prreeddiicctt P Puullssee S Suubbssccrriippttiioonn
Predict Pulse ™ is a remote monitoring and management subscription service that collects and analyzes data
from connected power infrastructure devices, providing Eaton with the insight needed to make
recommendations and take action on your behalf. This service has limited availability outside of the United
States. For more information go to
www.eaton.com/PredictPulse or contact your Eaton service representative.
Login to or create your https://PredictPulseapp.eaton.com account.
NOTE Refer to the Eaton PredictPulse Quick Start Guide for more information.
V Veerriiffyyiinngg aanndd U Uppddaattiinngg tthhee FFiirrm mw waarree R Reevviissiioonn
To register an installed PXGMS card for Predict Pulse :
1. Verify the firmware loaded onto your connectivity card is current. Open a browser and navigate to the
connectivity card’s IP address.
2. Scroll down on the Configuration menu, located in the bottom left, and click Firmware (see Figure 13 ).
Figure 13. Configuration Page
3. The current network card firmware revision displays (see Figure 14 ).
Register a Predict Pulse Subscription