Eaton Power Xpert Gateway 200E, User & Installation Manual

Page: 82 / 212

CHAPTER 8 - PXG200E CONFIGURATION WEB PAGE
EATON PXG200E User Manual • IM02603001E Rev 5, 11-May-2012 • Firmware Version 5.03:3835 74
3. This example shows how you would add one IQMESII meter
point to an IQMESII submaster.
Click on the button (Figure 70, A) in the device list of the PXG200E
configuration web page.
Figure 70
4. The drop-down menu “Create Which Device” (Figure 71, A) appears.
Choose Meter Point .
5. Click on the button (Figure 71, B) to proceed to Step 7 if you are
satisfied with your selection.
6. Click on the button (Figure 71, C) to go back to Step 3 if you wish
to change the selection.
Figure 71
PXG200E_240
A
PXG200E_241
A
C B
RETURN