CHAPTER 8 - PXG200E CONFIGURATION WEB PAGE
39
EATON
PXG200E User Manual • IM02603001E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
Configuration of Downstream Communication Ports
INCOM Configuration
INCOM Configuration allows you to change parameters in the INCOM
network.
The PXG200E supports synchronization of clocks on INCOM devices that
support the set time and date command.
1.
To access the INCOM Configuration, click on the INCOM link
(Figure 30, A)
in the toolbar of the PXG200E configuration web page.
2.
To enable the clock synchronization feature, click the ENABLE DATE/
TIME SYNC box
(Figure 30, B)
.
NOTICE: The default value of the clock synchronization feature
is enabled.
Figure 30
3.
Enter INCOM Receive Timeout Extend
(Figure 30, C)
in milliseconds.
INCOM Receive Timeout Extend is a value which is added to the default
INCOM timeout when receiving data from an INCOM device. It allows
the user to wait longer for INCOM responses from devices who may not
respond as promptly as others.
NOTICE: The default value of the INCOM Receive Timeout
Extend feature is zero.
4.
Enter the PowerNet IP address
(format aaa.bbb.ccc.ddd).
If the PXG200E is used as an EMINT in a PowerNet device server, enter
the IP address of the PowerNet device server in this field. This will
ensure that the PXG200E will only respond exclusively to that PowerNet
device server broadcast messages.
5.
You can SAVE ALL SETTINGS, VIEW CHANGES or DISCARD CHANGES
that you have made. For details on how to use these functions, see
Common PXG200E Configuration Functions on page 35
PXG200E_029
A
B
C
D
RETURN
