CHAPTER 8 - PXG200E CONFIGURATION WEB PAGE
EATON
PXG200E User Manual • IM02603001E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
54
11.
The screen illustrated in
contains items
that can be entered
by the user or automatically assigned by the PXG200E. For clarity, these
items are listed separately as
Items Entered By User on page 54
Items Automatically Assigned By PXG200E on page 55
.
Items Entered By User
•
Name
(Figure 49, A)
– Enter the name of the Main as you want it to
appear on PXG200E web pages. Maximum number of characters is
30.
•
Capacity (A)
(Figure 49, B)
– Enter the current carrying capacity in
amps for the Main you are adding. The PXG200E uses this value to
calculate the percentage of current capacity that is used by a
particular device. It is not used to provide an alarm. The default value
is 1000 A. When you configure a particular device, it is important to
enter its amp rating to ensure a meaningful value is provided when
you view the associated screen.
•
Address (Hex for INCOM devices; decimal for Modbus RTU devices)
(Figure 49, F)
– Enter the address of the trip device or meter. Each
device on the network has a unique address.
•
Enable Device
(Figure 49, E)
- This box must be checked to allow
this device to be polled. If this box is unchecked, the device will no
longer be displayed, trended, logged or otherwise communicated.
•
Enable Trending
– Click this box to enable trending
for this device. See
for details on this
feature.
Figure 49
PXG200E_042
A
B
C
F
D
G
H
E
RETURN
