MGR10 A/B/C - Revision : I (for 7.0 software revision)
37
Mem 4
Free
Mem 9
Free
Press
[OK]
to go back to the previous page
Press
[CLR]
to clear a memory number
Enter the memory number between 0 and 9 with the numeric keypad
Confirm the reset by pressing
[Yes]
Or escape the menu by pressing
[No]
Press
[OK]
to go back to the previous page
Lcd :
Press on the key with a light bulb drawing to power on or off the LCD backlight
Keep pressed on the key with a clear square to reduce the LCD contrast
Keep pressed on the key with a dark square to increase the LCD contrast
Press
[OK]
to go back to the previous page
Setup :
Press on
[Setup ]
to reach the unit system setup ( audible signal , date , time , language ,
temperature unity , software revision ,…..)
Press on
[Beep]
to set or rest an audible signal when pressing a key
Press on
[On]
to set the audible signal
Press on
[Off]
to reset the audible signal
Press
[OK]
to go back to the previous page
Press on
[Time Date]
to set the date and time
Press
[Chg]
to set the time
Enter the new time with the numeric keyboard according to the exact requested format
( 6 digits)
Press
[OK]
to enter
Press
[OK]
to display the date
Proceed as for the time to change the date ( date is Y2000 compatible )
Press
[OK]
to go back to the previous page
Press on
[Lang]
to select the language
Press on
[Eng]
to select English language
Or press on
[Fra]
to select French language
Press
[OK]
to go back to the previous page
Press on
[Temp unit]
to select the temperature unity : °C or °F
Press on
[°C]
to display temperature in degree Celsius
Press on
[°F]
to display temperature in degree Farenheit
Press
[OK]
to go back to the previous page
Press on
[Line Freq ]
to select the line frequency to insure a good measurement stability .
Press on
[50]
for a 50Hz line frequency (Europe)