MGR10 A/B/C - Revision : I (for 7.0 software revision)
34
Figure4.6.1-Data Logging Screen
Log #
Range
Resistance
Date
Time
1
30k
0.000 10/08/99
14:10:35
2
30k
0.000 10/08/99
14:10:37
3
30k
0.000 10/08/99
14:10:38
4
30k
0.000 10/08/99
14:10:40
5
30k
0.000 10/08/99
14:10:42
6
30k
0.000 10/08/99
14:10:44
Press on
[AUTO]
to review the previous pages
Press
[3 k
/
Quit]
or
[ 30 k
/
OK]
to escape the menu
No. Rdgs :
Press on [
No. Rdgs
], to display the number of current readings
Press on
[Chg]
, lto change the value
then enter the new value between 1 and 4000 by using the numeric keypad .
Press on
[OK]
to enter the value.
Press on
[OK]
to go back to the previous page
On :
Press
[On]
to activate the data logging mode
Press on [
Quit
] to escape the menu
Trigger measurements by pressing
[MES]
key to start the storage
Off :
Press
[Off]
to stop the measurement logging
Stat :
Press
[Stat]
to display
the statistical analysis of the values stored in the log. If any values have
been stored , the LCD screen displays :
‘Log contains insufficient entries’ and ‘Cannot compute statistics ‘
Escape the menu and trigger at least 2 measurements .
The following values will be computed and displayed
Minimum value [Min]
Maximum value [Max]
Mean value [Mean]
Peak to Peak value [PtP]
Standard Deviation [SD]
