Operating instructions ResistTel IP4/IP162
03/22
52
Preconditions
The PBX used must support the partner function feature, both telephones must belong to the same
group and the partner function must be enabled.
Function "MWI" for selected key f
Function key f controls the connection to the message center specified in the dialog in order to listen to
messages stored there.
Type:
MWI
.. Selection parameter set to function type
MWI
State:
....................... Selection element for setting the functional state
1
No new messages available.
2
New messages available.
Text:
[1] [2]
..................... Input parameters for optional specification of labeling texts.
Icon:
[1] [2]
..................... Selection parameter for the optional definition of pictograms.
LED:
[2]
......................... Selection parameter for defining the LED operating mode in state 2.
Number:
...................... Input parameters for specifying the number of the message center.
Add own nr.:
.............. Selection parameter for specifying the "Add own number" option.
Off
Use message center number only.
On
Append your phone number to the message center number.
Global:
...................... Selection parameters for specifying the "Global" option.
Off
Restrict MWI to this registration.
On
Extend MWI to all registrations.
Function "Call diversion" for selected key f
Function key f controls the call forwarding specified here, with which incoming calls can be forwarded
to different subscribers. Four different call diversions 1 - 4 can be set. In status 0 of the function, call
forwarding is inactive, calls are signaled on the device. States 1-4 are available to set different call
forwarding to cellphone, colleague, etc. When the set is idle, the activation of any call forwarding is
indicated by the pictogram shown on the left in the footer of the display. If call forwarding is "Always"
activated, the text "
Diverted to
,
forwarding destination
" is also displayed in reverse video in the
display area.
Type:
Call diversion
. Selection parameter set to function type
Call diversion
State:
1)
..................... Selection element for setting the functional state
0
Call forwarding is inactive.
1 – 4
Call forwarding 1 – 4 is active
Text:
[0]-[4]
..................... Input parameters for the optional definition of labeling texts.
Icon:
[0]-[4]
..................... Selection parameter for the optional definition of pictograms.
LED:
[1]-[4]
...................... Selection parameter for defining the LED operating mode in states 1-4
Call diversion
[1]-[4]
...... Open call forwarding dialog 1-4
5.1.4.1Call diversion, optional
39
1)
States whose call forwarding is all switched off are left out of the key sequence f. If only call
forwarding
[1]
is active, the status sequence is 1, 0, 1, 0 etc.; if, on the other hand, two call for-
wardings are activated, the status sequence is 1, 2, 0, 1, 2, 0 etc. and so on.
