Operating instructions ResistTel IP4/IP162
03/22
33
Connection status (pictograms)
Unconnected (Missed)
Voice connection
voice connection, redirected
Voice connection, transferred
Text message
Use the and keys to select the caller you want to redial and then press the right arrow key to
start the dialing process.
4.4
Operation, messages/displays on the display
4.4.1
Pictogram (call protection enabled)
This pictogram in the display area indicates that call protection has been activated. In the standard do
not disturb setting, incoming calls are not signaled acoustically and the telephone does not ring. To
deactivate call protection, press and hold the key when the telephone is idle until the pictogram
disappears.
4.4.2
Pictogram
(Missed Calls)
This pictogram in the display area shows the number of calls that you missed during your absence.
Inspect the
Calls (inbound)
list to hide the display of missed calls. To do this, press the recall key
or navigate to
Main menu\Call lists\Calls (inbound)
.
4.4.3
Pictogram (call forwarding enabled)
This pictogram in the left area of the footer indicates the activation of call forwarding, which always
forwards incoming calls, when busy or with a delay. Inspect the set call diversion in
Main menu\User
settings\Call diversion
and deactivate it if necessary.
4.4.4
Pictogram (number transfer disabled)
This pictogram in the left area of the footer indicates the deactivation of the number transmission for
outgoing calls, which means that your calls are "anonymous". The people you are calling cannot see
your phone number. Check the deactivated phone number transmission in
Main menu\User set-
tings\display phone no
and activate it if necessary.
4.4.5
Pictogram (phone lock enabled)
This pictogram in the left area of the footer indicates the activation of the phone lock.
4.4.7 Text overlay "Attention, no emergency calls possible! " Page 34
4.4.6
Text overlay "Keyboard locked! "
This text overlay in the display area of the display is an indication that instantaneous direct dialing is
activated. Direct dialing calls a configured destination number as soon as you set one of the conversation
modes. To remove this lock, you can disable direct dialing or set a delay time > 0. To do this, navigate
to the
Main menu\Phone settings\Direct dial
and set the selection parameter
Direct dial:
to
Off
or set the setting parameter
Delay (seconds):
to a value > 0.
5.1.5.2 Direct dial
Page 43
