Operating instructions ResistTel IP4/IP162
03/22
49
5.1.6.6
Set function keys for users 1-6
Main menu\User list\n UserName\
Function keys
Navigate to the
Function keys
item in the user menu of the user whose function keys you want to
define. Then press the key to open the
Function Keys
list, which allows you to assign a selectable
function to each of the 16 function keys, which is executed when the corresponding key on the tele-
phone is pressed. The figure below shows the open list of function keys and the differently configured
dialogs for function keys 1 (F1) and 2 (F2), which can be opened from the list by pressing the key .
Function key list
Functional key dialogs
Keys
Function keys
Shift 1
F1
Shift 2
F2
Shift 3
F3
Shift 4
F4
Shift 5
F5
Shift 6
F6
Shift 7
F7
Shift 8
F8
Shift 9
F9
Shift 10
F10
Input 1
F11/F12
Input 2
F13/F14
Input 3
F15/F16
To the right of the figure you will find the assignment of the telephone keys to the function keys in the
list. Two function keys FN/FN+1 are assigned to each of the three “keys” Input 1 – Input 3 of the
telephone, which are triggered when the inputs are activated alternately, as shown in the timing diagram
in the figure above for Input 1, depending on the operating mode. The necessary operating mode
configuration of the inputs can only be made in the drop-down lists
Input 1
-
Input 3
of the web
interface
WebIp162\Device\Keypad
. The operating mode names Mode 1-Mode 3 used in the figure are
"
Function key, press F11
", "
Function key, release F12
" and "
Function key, press F11 - release
F12
".
Hint:
Entries in the function key list that are preceded by an asterisk (1 * Jule) have been blocked for
telephone users in the web interface
WebIp162\Phone\User-n\Function-Keys
. Attempts to open the
associated dialogs will be ignored!
Function keys dialogs in general
Below is the
annotated description of a fictitious function key dialog listing the dialog elements common
to the concrete dialogs. The
Text
,
Icon
&
LED
elements are designed for telephone models with softkeys
that can be labeled and can be left in their default settings on the ResistTel IP4/IP162 that does not
have this equipment. An exception to this is the
Text
element, which you can use to specify the labeling
of the function key f in the function key list, which is otherwise labeled with the specified function type.
Type:
Xyz
.. Selection parameter set to function type
Xyz
.
Specifies the function type for the selected function key f and causes the type-
specific dialog elements to be displayed in the dialog.
State:
....................... Selection element for setting the functional state
Appears only for those function types whose function distinguishes between
different states. The setting causes the state-dependent dialog elements to be
displayed in the dialog. The general description is then followed by an enu-
meration with a description of the various states that the respective function
has. During operation, each actuation of the function key f causes the
