Operating instructions ResistTel IP4/IP162
03/22
45
5.1.6
Main menu – User list
Main menu\
User list
The phone supports registration of up to 6 users; one activated user and up to 5 co-users. Outgoing
calls are always made with the identity (subscriber number) of the activated user, while all incoming
calls to one of the registered and logged-in users are signaled on the phone (ringing). It is easy to
switch over during operation who is an active user of the telephone and which of the registered co-
users are logged in or out. The figure below shows two differently configured user lists and an example
of how one of the user menus is called up
Single user configuration
Multi user configuration
User 2 Smilla menu
Activation mark
Registration status
* Activated user
+ Registered user (incoming calls are signaled)
- Deregistered user (incoming calls are not signaled)
The user list menu contains a numbered element for each potential user, which shows the name, sub-
scriber number, registration status and activation status of registered users after the user number.
5.1.6.1
Activate of users 1-6
Main menu\User
list\n UserName\
Activate
Navigate to the action-switch
Activate
in the User menu of the user n you want to make the phone's
activated user. Then press the key to execute the activation. To confirm the action, the text message
OK
appears briefly on the display, followed by a return to the opened
User list
menu.
5.1.6.2
register/deregister of users 2-6 (co-users)
Main menu\User list\n UserName\Registration\
register/deregister
Navigate to the action-switch
register
/
deregister
in the
Registration
menu of the co-user n you
want to register or deregister. Then press the key to carry out the re-registration. To confirm the
action, the text message
OK
appears briefly on the display, followed by a return to the opened
User
list
menu.
5.1.6.3
Registration of users 2-6 (co-users)
Main menu\User list\n UserName\Registration\
Settings
Navigate to the
Settings
item in the
Registration
menu of the co-user n you want to register or whose
registration you want to change. Then press the key to open the
Registration
dialog, which is
described below.
Protocol:
.................. Selection parameter to select the protocol to use
H323
Protocol H323
TH323
Protocol TH323
SH323
Protocol SH323
SIP
Protocol SIP
TSIP
Protocol TSIP
SIPS
Protocol SIPS
Name:
......................... Input parameter for optional setting of the user name.
Number:
...................... Input parameter for optional definition of the user number.
Passw.:
...................... Input parameter for optional setting of a user password.
