![background image](http://html1.mh-extra.com/html/eaton/magnefix-md4/magnefix-md4_user-manual_4122434049.webp)
Magnefix MD4
991.184 G01 03
49
7. Grease the O-ring (f) using silicone grease or acid-free
Vaseline.
8. Place the O ring in the upper recess of the plastic entry
bushing (h).
9. Press the plastic entry bushing in the cable box (b)
and fit the two fixing shells (k) in the lower recess of
the entry bushing.
10. Clamp it using the hose clip (d).
7, 9
1: Slot for O ring;
2: Slot for fixation.
11. Slide the cable box on to the cast resin insulation of
the panel.
12. Draw the cable beside the cable box until the
polyethylene tape protrudes about 15 mm below the
cable box.
13. Mark the cable with a line (M) immediately above the
cable clamp.
14. Remove the cable box.
11