Page 34
TD 17558
Effective 3/98
Figure 4.17 Password Entry
4.10 EDIT SETPOINTS (3 and 4 wire systems)
This
menu
selection permits the user to
change
all of the IQ 200 setpoints and
system parameters.
Press
Menu
to display the list of available items.
Position the selection arrow next to
Edit Setpoints
and press
Enter.
If the
Password
option has been enabled, the system requests the password via the
screen shown in figure 4.17.
To enter the password, press
Enter
to move the
underline to the desired digit. Then use the
Scroll
up
arrow to increase the digit or the
Scroll
down arrow to
decrease the digit. When the desired choice is
displayed, press
Enter
to lock in the selection.
If an incorrect password is entered, the message
Password Incorrect
displays.
Press
Menu
to return to the previous screen showing
Edit Setpoints
selected. Press
Enter
to retry entering the password.
If the correct password is entered, or if the
Password
option is not enabled, the
following screens display:
4.10.1 Edit All
This
menu
item displays all of the setpoints described in
sections 4.10.2 through
4.10.10
. To edit only one setpoint, follow the steps under the appropriate section.
Selecting the
Edit All
menu
item displays the screens shown below as the
Scroll
down arrow is pressed. (Note: the lagging or leading indicator and any signs may be
the opposite of that shown in the sample screens.)
Position the selection arrow next to
Edit All
and press
Enter.
The following screens display:
4.10.2 Password Setup
Position the selection arrow next to
Password Setup
and press
Enter.
This screen, shown in figure 4.18, allows the user to
specify if a password is required to change the
IQ 200 setpoints or system parameters and what
the password is or would be if it were in use.
The screen initializes with
Use Password
selected and the current choice displayed. To
Figure 4.18 Password Setup
Summary of Contents for IQ 200
Page 52: ...TD 17558 Effective 3 98...
Page 53: ...TD 17558 Effective 3 98...
Page 54: ...TD 17558 Effective 3 98...
