TD 17558
Page 5
Effective 3/98
2.2 OPERATOR PANEL
The Operator Panel is the front face of the
IQ 200 Display Module. It is usually installed
so that it is visible and accessible from the
outside of the panel or door into which it is
mounted.
The
Menu
, up/down
Scroll,
and
Enter
buttons allow the operator to view, change,
and reset various system parameters:
Figure 2.3 Operator Panel
•
Display measured system, phase, and min/max values
•
View and edit all or individual setpoints
−
Password
−
INCOM™ network address and baud rate
−
System frequency
−
Wiring configuration
−
CT and PT ratios
−
Demand window
−
Energy tracking (KYZ pulse output)
•
View and reset energy, peak demands, and all or individual minimum and
maximum values.
•
Change the display contrast for best viewing
The Operator Panel is an integral part of the IQ 200 Display Module. Do not attempt
to remove it from the IQ 200 Display Module.
2.3 BASE MODULE REAR ACCESS AREA
All wiring connections are made from the rear face of the chassis, shown in
figure 2.4 below.
Figure 2.4 Base Module (Rear Face View)
Summary of Contents for IQ 200
Page 52: ...TD 17558 Effective 3 98...
Page 53: ...TD 17558 Effective 3 98...
Page 54: ...TD 17558 Effective 3 98...
