4
2.0 EV charge station commissioning via Wi-Fi
Green Motion BuildinG and Green Motion FleetcoMMissioninG Guide
IL191013EN June 2023 www.eaton.com
Follow the steps below to enable Wi-Fi:
1.
Connect the EV charge station to the Commissioning Tool per instructions in Section 8.0.
2.
When the EV charger is connected to the Commissioning Tool, go to Settings -> Wi-Fi.
Type the SSID and password of the Wi-Fi network you wish to connect and click Submit.
3.
Confirm that the EV charge station received these credentials in the Activity Log.
Figure 6. Activity Log showing the successful transfer of Wi-Fi credentials
4.
Reboot the EV charge station through the Commissioning Tool (Other Functions ->
Reboot EV charge station).
5.
Disconnect the EV charge station from the Commissioning Tool by disconnecting the
RJ45 (Ethernet) cable.
Once the EV charge station powers up, it will connect to the Wi-Fi router and subsequently
to the Eaton CNM. The image below shows the EV charge station is connected to a local
Wi-Fi connection and the Eaton CNM.
Figure 7. LCD screen of EV charge station connected to Eaton CNM via Wi-Fi
