Eaton FD120 Manual Download Page 2

Page: 2 / 44

Diesel Engine

Fire Pump Controllers

BR081011EN

April 2015

Reduced Size

A streamlined internal design has
allowed the overall size of the DIESEL
Plus controllers to be reduced from
previous models. See dimensional
drawings on our website.

Technical Specifi cations

• Supply

Voltage:

100-240Vac

• Output

Voltage:

12-24Vdc

•

Hertz: 50/60 Hz

• Enclosure:
Standard NEMA 2
•

Optional NEMA 3R, 4, 4X, 12

• Temperature:
4 to +50 deg. C
39 to +122 deg. F
•

Alarm Relays: DPDT 8amp

•

Engine Run Relay:

DPDT 10amp
•

Crank / Fuel Stop Relays: SPDT

• Pressure

Transducer:

500psi

• Immunity

Compliance:

Environment A
• Emission

Compliance:

Environment B

Battery Chargers

• Mode:

Switching

•

Dual 10 Amp

•

Communication to Power

I/O Board
• Diagnostics

Recording

•

Lead Acid or NiCadThree Step
Charge

• Internal

Temperature

Monitoring

• Universal

Voltage

Input

•

Selectable Dual Voltage Output

Standards & Certifi cation

The FD120 Diesel Engine Fire
Pump Controllers meet or exceed
the requirements of Underwriters
Laboratories, Factory Mutual
Research (FM), the Canadian
Standards Association, New York City
building code, CE mark and U.B.C. /
C.B.C Seismic requirements, and are
built to NFPA 20 standards.

LCD Display

The Controller Display Board contains
a 4 Line by 40 Characters wide, back-
lit, LCD display which is capable of
generating multiple languages. The
display will show the current system
pressure, time and date, charger
output voltage and any custom mes-
sages, alarms or timer values.

Status LED's

The controller is supplied with six (6)
green status LED's for the following:

• LOW

PRESSURE

• ENGINE

RUN

• REMOTE

START

• INTERLOCK

• DELUGE

VALVE

•

One Programmable LED

Alarm LED's

The controller is supplied with
twenty (20) red alarm LED's for the
following:

•

BATTERY #1 FAILURE

•

CHARGER # 1 FAILURE

•

BATTERY #2 FAILURE

•

CHARGER # 2 FAILURE

•

LOW PRESSURE

•

SYSTEM OVER PRESSURE

•

LOW SUCTION PRESSURE

• LOW

FUEL

•

FAIL TO START

• HIGH

ENGINE

TEMP

•

LOW OIL PRESSURE

•

ENGINE OVER SPEED

•

ECM SELECTOR IN ALT

POSITION

• FUEL

INJECTION

MALFUNCTION

• ECM

WARNING

• ECM

FAILURE

• HIGH

RAW

WATER

TEMP.

• LOW

ENGINE

TEMPERATURE

• FUEL

SPILL

•

One Programmable LED

Statistics

Up to 26 statistical points are record-
ed to provide a quick review of how
the system has been operating. The
statistics can be viewed on the main
display, saved to a USB disk drive, or
viewed on the embedded webpage.

Diagnostics

Up to fi fty three diagnostic points are
recorded that can be used to help
in troubleshooting issues with the
controller. The diagnostics can be
viewed on the main display, saved
to a USB disk drive, or viewed on the
embedded webpage.

Message History

Up to10k alarm/status messages can
be stored in the controller memory.
They can be viewed on the main
display, saved to a USB disk drive, or
viewed on the embedded webpage.

DC Fail

A visual indication and audible alarm
is provided to indicate DC power loss
due to one or both batteries being
disconnected from the controller.
This indication will also be provided if
the controller is not operating due to
an electronic board failure.

Programmable Features

• Languages
•

(English, French, Spanish
Standard. Other languages are
available. Consult factory.)

• Date

and

Time

•

Pressure Start and Stop Points

•

Low and High Pressure Alarms

• Stop

Mode