70
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
2019.04.4
Main Shaft and Countershaft Removal
|
Removal
TRSM0950
21.
Install a magnet onto Main Shaft Key to ensure the key
stays in place during Main Shaft Removal and Installa-
tion.
22.
Hold Rail C Sliding Clutch against Secondary Driven
Gear and lift Main Shaft from Primary Drive Gear.
CAUTION:
Main Shaft weighs approximately 35 lbs.
Keep fingers clear of pinch point between Main Shaft
and other surfaces. Dropping Main Shaft could result
in component damage and/or personal injury.
Note:
Spring and Washer may remain attached to the
Main Shaft during removal.
23.
Remove Wave Spring - Rear.
24.
Remove Thrust Washer - Rear.
25.
Remove Thrust Bearing - Rear.
!
Summary of Contents for Endurant
Page 1: ...Service Manual Endurant 12 Speed Automated Transmission TRSM0950 EN US March 2019 ...
Page 2: ......
Page 247: ......
