54
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
2019.04.4
Rear Housing Assembly Removal
|
Removal
TRSM0950
13.
Lift and remove Rear Housing Assembly from Main
Housing.
WARNING:
Rear Housing Assembly weighs approxi-
mately 170 lbs. Failure to properly secure and lift the
Rear Housing Assembly may result in major vehicle
component damage, severe injury or death.
NOTICE:
Use an appropriate lifting device to safely lift
component.
Note:
Dual PTO Transmissions are equipped with a
rear PTO lube tube port on the pump and rear PTO
drive splines on the Upper Countershaft.
14.
Place Rear Housing Assembly on bench.
WARNING:
Rear Housing Assembly weighs approxi-
mately 170 lbs. Keep fingers clear of pinch point
between Rear Housing Assembly and other surfaces.
Dropping Rear Housing may result in major vehicle
component damage, severe injury or death.
NOTICE:
Support the Rear Housing Assembly to pre-
vent damage to Shift Rail E.
15.
Remove the 2 Rear Housing Alignment Pins
(RR1090TR) from the Main Housing.
!
!
Summary of Contents for Endurant
Page 1: ...Service Manual Endurant 12 Speed Automated Transmission TRSM0950 EN US March 2019 ...
Page 2: ......
Page 247: ......