47
Keyboard Diagnostic Mode
The keyboard diagnostics allows the user to test each of the front panel keys, the
display, and the analog and relay outputs if present in the unit.
Caution: performing the keyboard diagnostic tests will turn ON the analog
and relay outputs if they are installed in the unit. Remove power from the
counter and disconnect any output that should not activate its load during the
diagnostic tests.
To enter the keyboard diagnostic mode,
1.
Turn power to the unit OFF.
Durant
®
1
P o w e r
In
2
2.
If any control input is programmed to a lock function, remove the jumper wire
from that input to ground.
3.
While holding down both the
Edit
and
Start
keys, turn unit power ON. After
1.5 seconds, the unit will be in the diagnostic mode. Release the
Edit
and
Start
keys at this time. All LED segments and the program LED will be ON. If
present, both relays will be OFF, and the analog output will be at minimum
values (4 mA and 0V).
Edit
P o w er
In
D u rant
Start
DIAGNOSTICS cont.
!
