Installation Leaflet
Page 4 Effective: April 2003
Pow-R-Command 100
IL01412003
For More Information visit www.cutler-hammer.com
SECTION 1: MOST COMMON
CONFIGURATIONS AND
DESCRIPTIONS
Cutler-Hammer offers a full line of different
types of chassis and configurations for
Pow-R-Command 100 applications. Most
common configurations are described
below.
1-1 POW-R-COMMAND PANELBOARD
Pow-R-Command 100 Panelboard can come
in two main configurations:
1) Panelboard with 5X-Controller
Chassis (see Fig. 1-1). The 5X-Controller
Chassis contains the Universal Systems
Controller (USC) allowing the user to
control the GHBS or BABR breakers
using the time schedules or the console.
Panelboard with 5X-Controller Chassis
and 7X-Expansion Chassis
(see Fig. 1-2).
2) Combining the 5X Controller Chassis, the
7X Expansion Chassis accommodates
one of the Application Specific Control-
lers which expand the panels capabili-
ties.
For low-voltage device termination, please
refer to SECTION 3 Subsection 3-1.
Panelboards can operate as stand-alone or
be a part of network system. For network
termination, please refer to SECTION 5.
Remotely Controlled
Branch Circuit Breakers
5X-Controller Chassis With
USC Controller Card Installed
P/S Cable
7
x-Expansion Chassis
Figure 1-1 (Left): Pow-R-Command 100 Panelboard With 5X-Controller Chassis &
Figure 1-2 (Right): Pow-R-Command 100 Panelboard With 5X-Controller Chassis and 7X-Expansion Chassis
