TRANSDUCERS, ACCESSORIES AND REPLACEMENT PARTS LIST
47
Timer Module
48160-440
The Durant Timer Module, 48160-440, provides a series of timed
output pulses at a rate selectable by the user. The selection is made
by setting a DIP switch located on the side of the module. A variety
of pulse rates, from 1,000 pulses per second to 10 pulses per
minute, can be set on the switch. The timer module will convert any
Durant electronic counter or count control with a high speed (5000
Hertz) input into a timer.
Input Signal Conditioner
48160-400
The Model 48160-400 Signal Conditioner converts a wide range of
input signals to a level that is compatible with Durant Electronic Con-
trols. It will accept differential inputs from 50 millivolts to 400 volts
and ground referenced inputs from 2.4 volts to 100 volts.
Relay Module
This unit has two relays that may be operated by transistors that are
rated to carry at least .075A in a 12-volt circuit. Each relay has DPDT
contacts for controlling external loads. The relays are plug-in type for
easy replacement. The 12-volt power for the relays is provided from
the AC input.
115 VAC input power
51611-400
230 VAC input power
51611-401
Desk Mounting Kits
These attractive mounting kits fit the Durant Series 5880 count controls
for installation on any flat surface. The convenient two piece “snap
together” design requires no tools for assembly. Four non-skid rubber
feet prevent the control from sliding on the mounting surface. Standard
conduit knockouts are provided on the rear of the kit for wiring to the
process. The 58802-410 kit fits the 5881-0400 Totalizer. The 58802-420
kits fits all other 5880 series count controls.
58802-410
58802-420
