background image

4

5

INM MTL9373-FB3 Rev 1

INM MTL9373-FB3 Rev 1

PERMITTED CONFIGURATIONS

A maximum of two 12-spur, Fieldbus Barrier modules is permitted per Fieldbus trunk. 

The permitted options are illustrated in Figure 3.1 - (a), (b) and (c). 

 

a)  A single barrier module in a field enclosure - with termination 

 

b)  Two barrier modules in a single field enclosure - with termination only on  

 

 

second barrier

 
See section 5 – Electrical Installation - for information on providing the appropriate 
termination conditions for the trunk wiring.

                          

                                                 Figure 3.1

 – Permitted implementations for Fieldbus Barriers

1

2

3

10 

11  12 

from HOST

Trunk

Not

intrinsically

safe

Intrinsically

safe spurs

T

1

2

3

10 

11  12 

from HOST

Trunk

Not

intrinsically

safe

Intrinsically

safe spurs

1

2

3

10 

11  12 

Intrinsically

safe spurs

T

1

2

3

10 

11  12 

from HOST

Trunk

Not

intrinsically

safe

Intrinsically

safe spurs

1

2

3

10 

11  12 

Intrinsically

safe spurs

T

(a)

(b)

(c)

MECHANICAL INSTALLATION 

See Figure 4.1 and 4.2 below for the dimensions, fixing locations and cable  
gland positions of the two main enclosure options.

 

Figure 4.1 – 

Fieldbus Barrier Standard Small enclosure dimensions

Notes: 

 

1.  The enclosure is also available with a stainless-steel mounting bracket for a  

 

 

traffolyte tag label. (See Figure 4.2 for more details.)

 

2.  A hinged lid with a quarter-turn lock (not shown here) is a further option when  

 

 

ordering. This does not affect the overall enclosure dimensions.

11

(267

-  W

all fixiing c

en

tres)

Ø 11

(362 - Wall fixing centres)

M10 "Earth" weld stud

30

5

35

65

70

32

41

3x20=60

20

142

183

3x20=60

13 off, Ø 20.3

±0.20

2 off Trunk gland positions

20.3 ±0.2

(68)

(13

)

(152 )

Lid - Fully bolted

Summary of Contents for Crouse-Hinds 9373-FB3 Series


















Reviews: