Figure 3. Line illustration with dimensions of sectionalizing switch with “Ring-Mount System.”
Notes:
1. Dimensions given in Figure 3 and Table 3 are for reference only.
2. Handle can be used on 14 gauge .075 inch (1.9 mm) to .25 inch (6.4 mm) thick frontplate. 14 gauge shown.
3. Optional padlock handle is available. See catalog section CA800005EN, Table 6 and Figure 6.
4. See catalog section CA800005EN for switch types, number of phases, and catalog numbers.
Figure 2. Line illustration with dimensions of sectionalizing switch with “Bolt-In System.”
Notes:
1. Dimensions given in Figure 2 and Table 3 are for reference only.
2. Handle can be used on 14 gauge .075 inch (1.9 mm) to .25 inch (6.4 mm) thick frontplate. 14 gauge shown.
3. Optional padlock handle is available. See catalog section CA800005EN, Table 6 and Figure 6.
4. See catalog section CA800005EN for switch types, number of phases, and catalog numbers.
4.38"
(111 mm)
8.35"
(212 mm)
TANK SEALING
GLAND FURNISHED
WITH SWITCH
ALL LINE CONNECTIONS
5.15"
(131 mm)
TYP
MTG. HOLES
2.75"
(70 mm)
SEE
NOTES
2 and 3
Ø .44" (11 mm)
TANK WALL
E
Ø .39" HOLE
(10 mm)
8.32" (211 mm)
5.40"
(137 mm)
D
B
C
ARC
BARRIER
.89"
(23 mm)
A
F
ALL LINE CONNECTIONS
TYP
SEE
NOTES
2 and 3
TANK WALL
NUT & LOCKING NUT RETAINER
FURNISHED WITH SWITCH
E
2.75"
(70 mm)
4.38"
(111 mm)
8.35"
(212 mm)
8.32" (211 mm)
Ø .39" HOLE
(10 mm)
5.40"
(137 mm)
5.15"
(131 mm)
D
B
C
ARC
BARRIER
.89"
(23 mm)
A
F
Dimensional information
!
3
SECTIONALIZING SWITCH INSTALLATION INSTRUCTIONS
MN800002EN March 2016
