Eaton C440/XTOE User Manual Download Page 7

Page: 7 / 40

C440/XTOE Electronic Overload Relay, DeviceNet

C440/XTOE Electronic Overload Relay, DeviceNet

MN04210002E—March 2011 www.eaton.com

List of Tables

Electronic Overload Education . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Electronic Overload Relays Up to 1500A—Ratings and Specifications . . . . . . . . . . . . .

C440/XT Standalone Overload Relays (

, C440). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

NEMA Freedom Series Starters with C440 Electronic Overload Relays . . . . . . . . . . . .

IEC

Starters with

Electronic Overload Relays . . . . . . . . . . . . . . . . . . . . . . . . . . .

Field Terminal Wire Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

120 Vac Input Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24 Vdc Input Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Relay Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pilot Duty Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DIP Switch Baud Rate Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DIP Switch Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C440 DeviceNet Full Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Identity Instance Services (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Identity Instance Attributes (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Bit Definitions for Instance #1, Status Attribute of Identity Object (C440) . . . . . . . . . . .

Defined States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Message Router Instance Services (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Message Router Instance Attributes (C440). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DeviceNet Instance Services (C440). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DeviceNet Instance Attributes (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Assembly Instance Services (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Assembly Instance Attributes (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Assembly Instances (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input Assembly 50 (C440). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input Assembly 107 (C440). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C440 Short Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C440 Long Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input Assembly 120 and 130 Selection List (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output Assembly 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output Assembly 105 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connection Instance Services (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connection Object Instance #1 Attributes (Explicit Messaging) (C440) . . . . . . . . . . . . .

Connection Object Instance #2 Attributes (Polled I/O) (C440) . . . . . . . . . . . . . . . . . . . .

Connection Object Instance #3 Attributes (Bit strobe I/O) (C440) . . . . . . . . . . . . . . . . .

Discrete Input Point Instance Services (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Discrete Input Point Object Instance #1–4 (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Discrete Output Point Instance Services (C440). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Discrete Input Point Object Instance #1–4 (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Control Supervisor Instance Services (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Control Supervisor Instance Attributes (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Faulted State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Overload Instance Service (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Overload Instance Attributes (C440) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DeviceNet Interface Object Instance Services (C440) . . . . . . . . . . . . . . . . . . . . . . . . . .

DeviceNet Interface Object Instance Attributes (C440) . . . . . . . . . . . . . . . . . . . . . . . . .

C440 DeviceNet.book Page v Friday, March 25, 2011 10:41 AM

For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616

Summary of Contents for C440/XTOE









































Search results

Summary of Contents for C440/XTOE

Reviews:

Related manuals for C440/XTOE

Brands by name

Popular brands

Eaton C440/XTOE, User Manual

Search results

Summary of Contents for C440/XTOE

Reviews:

Related manuals for C440/XTOE

Brands by name

Popular brands