C440-COM-ADP Communication Module
12
C440/XTOE Electronic Overload Relay, DeviceNet
MN04210002E—March 2011 www.eaton.com
24 Vdc Input Requirements
The 24 Vdc input circuit is capable of both isolated and
unisolated behavior. The isolated inputs share a single
common tie point. A 24 Vdc current limited source/ground is
provided in situations that require locally supplied input signal
voltage. To use the unisolated inputs tie the 24 Vdc ground/
common to the isolated common.
24 Vdc Inputs
Note:
Do not connect a 24 Vdc source to pins 6 and 7. The
“I/O Power: 24 Vdc” is to be used only in conjunction
with the inputs. It is a 24 Vdc output intended to only
supply signal power for the inputs. When using the 24
Vdc input supply, pin 6 should only be connected to
pin 5 (24 Vdc input supply common to input common).
See example wiring diagrams. Any device using the
provided 24 Vdc input supply must have 500V
isolation from ground. Example devices include
pushbuttons.
24 Vdc Input Specifications
Example: Non Isolated 24 Vdc Input Source
Example: Isolated 24 Vdc Input Source
Specification
Value
Number of inputs
4
Nominal voltage
24 Vdc
Nominal current
5 mA
Type
Current sinking
Input type
IEC 61131-2, type 1 digital
Maximum 24 Vdc source current
50 mA
Isolation voltage
250 Vac
Vdc
Vdc
Vdc
24 Vdc
24 Vdc
Example:
No
n
isolated 24 Vdc i
n
put source.
I
n
put source power is take
n
from
the 5 pi
n
co
nn
ector.
Co
nn
ect C a
n
d 0V together.
Use 24 to source i
n
uts.
–
–
–
24 Vdc
24 Vdc
24 Vdc
Example:
No
n
isolated 24 Vdc i
n
put source.
The
i
n
puts must be supplied by a
n
exter
n
al power source.
Do
n
ot co
nn
ect the exter
n
al supply
to
termi
n
als 0V a
n
d 24.
Co
nn
ect isolated power source
betwee
n
C a
n
d i
n
puts.
C440 DeviceNet.book Page 12 Friday, March 25, 2011 10:41 AM
For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616