manualshive.com logo in svg

Eaton C440/XTOE, User Manual, Page: 14 / 40

Share
Download
Eaton C440/XTOE User Manual Download Page 14

Technical Data and Specifications

6

C440/XTOE Electronic Overload Relay, DeviceNet

    MN04210002E—March 2011    www.eaton.com

Electronic Overload Relays Up to 1500A—Ratings and Specifications, continued 

Specification

Description

45 mm

55 mm

Short-Circuit Rating without Welding

Maximum fuse

6A gG/gL

6A gG/gL

Environmental Ratings

Ambient temperature (operating)

–13° to 149°F (–25° to 65°C)

–13° to 149°F (–25° to 65°C)

Ambient temperature (storage)

–40° to 185°F (–40° to 85°C)

–40° to 185°F (–40° to 85°C)

Operating humidity UL 991 (H3)

5% to 95% non-condensing

5% to 95% non-condensing

Altitude (no derating) NEMA ICS1

2000m

2000m

Shock (IEC 600068-2-27)

15g any direction

15g any direction

Vibration (IEC 60068-2-6)

3g any direction

3g any direction

Pollution degree per IEC 60947-4-1

3 for product (2 for pcb)

3 for product (2 for pcb)

Ingress protection

IP20

IP20

Protection against direct contact when actuated 
from front (IEC 536)

Finger- and back-of-hand proof

Finger- and back-of-hand proof

Mounting position 

Any

Any

Climatic proofing 

Damp heat, constant to IEC 60068-2-30

Damp heat, constant to IEC 60068-2-30

Electrical/EMC

Radiated emissions 
   IEC 60947-4-1-Table 15 
   EN 55011 (CISPIR 11) Group 1, Class A, ISM

30 MHz to 1000 MHz

30 MHz to 1000 MHz

Conducted emissions
   IEC 60947-4-1-Table 14 
   EN 55011 (CISPIR 11) Group 1; Class ISM 

0.15 MHz to 30 MHz

0.15 MHz to 30 MHz

ESD immunity
   IEC 60947-4-1 (Table 13)

±8 kV air, ±6 kV contact

±8 kV air, ±6 kV contact

Radiated immunity 
   IEC 60947-4-1
   IEC 61000-4-3

10V/m 80 MHz–1000 MHz 
3V/m from 1.4 to 2.7 gHz
80% amplitude modulated
1 kHz sine wave

10V/m 80 MHz–1000 MHz 
3V/m from 1.4 to 2.7 gHz
80% amplitude modulated
1 kHz sine wave

Conducted immunity
   IEC 60947-4-1, IEC 61000-4-6

140 dub (10V rms) 
150 kHz–100 MHz 

140 dub (10V rms) 
150 kHz–100 MHz 

Fast transient immunity
   IEC 60947-4-1 (Table 13) 
   IEC 61000-4-4 

±4 kV using direct method
   with accessory installed in expansion bay 
±2 kV using direct method

±4 kV using direct method
   with accessory installed in expansion bay 
±2 kV using direct method

C440 DeviceNet.book  Page 6  Friday, March 25, 2011  10:41 AM

For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616

Summary of Contents for C440/XTOE









































Reviews:

No comments