background image

Eaton.com/bussmannseries

10

Instruction Sheet IS10207 Rev 3

Effective July 2015

BSPD SPDs for switchgear and power distribution panels 

5.0 Specifications

Table 3. Specifications

Description

Specification

Available system voltages

Three-phase Wye

120/208, 277/480 and 347/600

Three-phase Delta

240, 480 and 600

Input power frequency

50/60Hz

Maximum Continuous Operating Voltage (MCOV)

208Y, and 240D voltage/system type codes 

150 L-N,150 L-G, 150 N-G, 300 L-L 

480Y Voltage/system type code

320 L-N, 320 L-G, 320 N-G, 640 L-L 

600Y Voltage/system type code

420 L-N, 420 L-G, 420 N-G, 840 L-L

480D Voltage/system type code

640 L-G, 640 L-L 

600D Voltage/system type code

840 L-G, 840 L-L

Short-Circuit Current Rating (SCCR) 

200kA

Nominal discharge current (I

n

20kA

Surge current capacity per phase (I

max

120kA, 200kA, 300kA and 400kA ratings available

SPD types

Type 1 (

Basic configuration, can also be used in Type 2 applications) 

Type 2 (s

tandard and standard with surge counter configurations)

Enclosure types

NEMA 1, NEMA 4X

Ports

1

SPD Conductor length/gauge

48” (1.22m) 10AWG stranded copper

Form C contact relay (s

tandard and standard with surge counter configurations only)

Contact ratings 

150Vac or 125Vdc, 1A maximum

Lead length/gauge 

48 inches (1.22m) / 14AWG

Contact logic

Power ON, normal state; N.O. contact = OPEN, N.C. contact = CLOSED  

Power OFF, fault state; N.O. contact = CLOSED, N.C. contact = OPEN

Power consumption

Basic configuration

208Y and 240D voltage/system type codes

0.5W 

480Y and 480D voltage/system type codes

1.1W 

600Y and 600D voltage/system type codes

1.3W

Standard and standard with surge counter configurations

208Y and 240D voltage/system type codes

0.6W 

480Y, and 480D voltage/system type codes

1.7W 

600Y and 600D voltage/system type codes

2.1W

Protection modes 

Three-phase Delta; L-G, L-L 

Three-phase Wye; L-N, L-G, N-G, L-L

Operating temperature / humidity

-40 to +50°C (-40 to +122°F) / 5% to 95%, non-condensing

Operating altitude - ft (m)

16,000 (5000)

EMI/RFI filtering attenuation

Up to 50dB from 10kHz to 100MHz (s

tandard and standard with surge counter 

configurations)

Weight - lbs (kg)

NEMA 1: 120kA-200kA - 6.8 (3.1), 30- 400kA -13.5 (6.1) NEMA 4X: 120-200kA - 14.6 (6.6), 

300-400kA - 21.0 (9.5)

Agency information

Basic, standard and standard with surge counter configurations UL Listed 1449 3rd Edition 

File E316410 Guide VCZA, CSA Certified Notice 516 File 243397

Standard and standard with surge counter  configurations are also UL Recognized 1283 

5th Edition File E316410 Guide VCZA2, CSA Component Acceptance Std. C22.2  

No. 8-M1986 File 243397

Seismic withstand capability

Meets or exceeds the requirements specific to I.B.C. 2006, C.B.C 2007 and U.B.C Zone 4

Warranty

10 Years (see warranty statement 3A1502 for details at www.cooperbussmann.com/Surge)

Summary of Contents for Bussmann Series













Reviews: