INSTALLATION
Eaton BladeUPS Bar Installation Guide
S
164201723 Rev 2
www.eaton.com/powerquality
6
Checking the Package Contents
Verify that the following items are included in the package:
S
One of the following BladeUPS Bars:
BladeUPS Bar 4-High.
A four-socket bar with (1) attached terminal block
assembly, (1) attached terminal block assembly bracket, and
(2) attached mounting brackets
BladeUPS Bar 6-High.
A six-socket bar with (1) attached terminal block
assembly, (1) attached terminal block assembly bracket, and
(3) attached mounting brackets
S
Wireway main housing with (2) attached side brackets, (1) attached
terminal block housing, and (1) attached wireway access cover
S
Front cover mounting panel
S
(2) front covers
S
Ferrite assembly with 38 cm (15
”
) tie wrap
S
This user's guide
S
Packaged hardware items:
-
BladeUPS Bar 4-High.
(12) M6
12 hex bolts, plus (1) extra
-
BladeUPS Bar 6-High.
(14) M6
12 hex bolts, plus (1) extra
-
(4) M5
16 hex bolts
-
(6) M6
12 pan-head screws, plus (1) extra
-
(3) M4
8 pan-head screws
-
(6) M6 split lock washers, plus (1) extra
-
(4) M5 cage nuts
-
(3) M6 hex nuts, plus (1) extra
BladeUPS Bar Installation
Follow the appropriate procedure for the BladeUPS Bar wireway
location:
S
Follow the procedure “BladeUPS Bar Installation (Bottom Entry
Wireway)” on page 7 if you are installing the bar with the wireway at
the bottom of the rack.
S
Follow the procedure “BladeUPS Bar Installation (Top Entry
Wireway)” on page 17 if you are installing the bar with the wireway at
the top of the rack.
