Eaton 9395XC UPS 1200kW/1200kVA, 1350kW/1350kVA or 1500kW/1500kVA 164001079—Rev 01
131
•
A foundation based on CA Technologies’ leading Data Center Infrastructure Management (DCIM) software
application. This enables powerful reporting, analytics, security and compatibility with hundreds of power
infrastructure devices.
88..22..22
IInnssttaalllliinngg P
PrreeddiiccttP
Puullssee
A quick start guide and self-installation wizard tool are available at www.eaton.com/predictpulse. The latest
updates, installation tips and information on connecting PredictPulse are also available at that link. For
installation support or questions about PredictPulse, contact
.
PredictPulse relies on a Native 9395XC 1G Ethernet Port or a Power Xpert Gateway UPS card installed with the
UPS to send one-way outbound SMTP e-mails to Eaton, as well as an environmental monitoring probe (EMP)
for battery temperature/humidity monitoring. PredictPulse is secure as Eaton never communicates through
your firewall—it only listens for health data and alarm data—and uses industry-standard security protocols. By
using a common e-mail transport mechanism, you do not have to open your network to proprietary or
potentially unsecure protocols and transports. The PXGX connectivity card gathers information directly from the
UPS and any external sensors that are attached, and transmits that data every 15 minutes (or 96 times per day),
enabling real-time monitoring and advanced virtual preventive maintenance.
88..33
P
Poow
weerr M
Maannaaggeem
meenntt S
Sooffttw
waarree
Eaton’s software solutions, based on Web2.0 technology, include two applications: Intelligent Power
Manager
®
for UPS management and monitoring, and Intelligent Power Protector
®
, which allows graceful
shutdown of operating systems.
Eaton’s Intelligent Power Software gives you all the tools you need to monitor and manage power devices on
your network, even in a virtualized environment. This innovative software solution combines the most critical
applications in ensuring system uptime and data integrity: not only power monitoring and management, but
also graceful shutdown during an extended power outage.
Because it can manage redundant power systems, it is an ideal solution for the most critical IT environments
with stringent requirements for power availability and reliability. Yet it is easy to use – the software scales
flexibly from a simple single-computer, single-UPS configuration, to the most sophisticated high availability
environments.
The software’s mass configuration capabilities make installation and maintenance easy, which minimizes the
effort required and benefits the bottom line. Eaton’s cost effective Intelligent Power Software manages up to
ten devices at no charge, with licences for up to 100 devices – or even an unlimited number – also available.
Contact your Eaton Sales representative for additional information.
88..44
B
Buuiillddiinngg A
Allaarrm
m M
Moonniittoorriinngg
This standard feature lets you connect the UPS to your building alarms, such as smoke detectors or over-
temperature alarms. The customer interface terminals for external connections are located inside the UPS. You
should use twisted-pair wires for each alarm input and common.
The building alarms can be programmed to display the alarm functional name.
88..55
G
Geenneerraall P
Puurrppoossee R
Reellaayy C
Coonnttaacctt
One general purpose relay contact is provided as a standard feature on the UPS. The alarm contact is located
inside the UPS on the customer interface terminal board.
You can use a normally-closed or normally-open contact. If the state of the contact changes from the state you
specify as normal, a signal is issued. You can connect this contact to equipment at your facility (such as a light
or an alarm bell) to let you know when an alarm is active on the UPS. This feature is useful if the UPS is located
in a remote area where the UPS horn may not be heard immediately.
Summary of Contents for 9395XC
Page 8: ......
Page 160: ...16400107901 164001079 01 ...
