Eaton 9355 Series, User Manual

Page: 23 / 72

Eaton 9355 Parallel UPS (10/15 kVA) User's Guide 164201601—Rev E0 13
C Chhaapptteerr 44 U UP PS S S Syysstteem m IInnssttaallllaattiioonn
44..11 P Prreelliim miinnaarryy IInnssttaallllaattiioonn IInnffoorrm maattiioonn
WARNING
Installation should be performed only by qualified personnel.
Refer to the following while installing the UPS system:
• Review Chapter 3 UPS Installation Plan and Unpacking , for cabinet dimensions, equipment weight,
wiring and terminal data, and installation notes.
• Do not tilt the cabinets more than ±10° during installation.
• Remove conduit landing plates to add conduit landing holes as required.
• If perforated floor tiles are required for ventilation, place them in front of the UPS.
44..22 U Unnllooaaddiinngg tthhee U UP PS S C Caabbiinneett ffrroom m tthhee P Paalllleett
The following tools are required for unloading the cabinet(s):
• 15 mm wrench or socket
• 7 mm nut driver or socket
CAUTION
The UPS and EBM are heavy (see Table 2 ). Unloading the cabinets requires at least two people to safely
remove the cabinets from the pallet.
To unload three-high cabinets or two-high EBMs, proceed to paragraph
4.2.1 Three-High Cabinets or Two-High EBMs . To unload two-high UPS cabinets, proceed to paragraph
4.2.2 Two-High UPS Cabinets .
44..22..11 TThhrreeee--H Hiigghh C Caabbiinneettss oorr TTw woo--H Hiigghh EEB BM Mss
To remove a three-high cabinet or a two-high EBM from the shipping pallet:
1. Remove the two M10 bolts securing the stabilizing bracket to the pallet (see Figure 2 ).