Eaton 199996, Manual

Page: 52 / 134

3. Installation
3.4 Mounting
21" devices
Locations for twelve holding brackets for an IP65 degree of protection
and for devices used in hazardous locations
l
On the top and bottom sides of the device:
One holding bracket each at the left and right outer fixing positions, as well as to
the left and right of the center
l
On the left and right sides of the device:
One holding bracket each at the upper and lower fixing positions
Fig. 15: Location of holding brackets for IP65 on the XP-504-21-...
IP rating
If the gasket is resting in the correct position and the holding brackets are installed
properly, the following IP degrees of protection will be achieved:
l
IP65 (at front)
l
IP20 (at rear)
52
XP-504 04/2022 MN048028EN Eaton.com