Eaton 199740 Manual Download Page 60

Page: 60 / 91

6. Operation
6.2 Device menus

Log button

This menu page can be used to see the various logins into the device and export
them through the USB port.

/Log

Fig. 18: Log

/Log

Fig. 19: Selecting a log for Export

It is recommended to export the information, as some logs are extremely long and it
will take a long while for the information to be shown on the easy-RTD with the Show
button.

The following are available:

Authentication Log:

Log for authentication at the operating system level

BootLog:

Log for the most recent boot operation

ErrorLog:

Log of error messages at the operating system level

RaucLog:

Log for boot partitions

SystemLog:

Comprehensive log for all other system messages, including mounting external USB
drives, hardware driver messages, and network events.

easy Remote Touch display

06/21 MN048027EN Eaton.com

Summary of Contents for 199740




























































































Search results

Summary of Contents for 199740

Reviews:

Related manuals for 199740

Brands by name

Popular brands

Eaton 199740, Manual

Search results

Summary of Contents for 199740

Reviews:

Related manuals for 199740

Brands by name

Popular brands