7
Instruction Book IB182312EN June 2016 www.eaton.com
50/75/150 VCP-W
Selectable Ground and Test Device
SECTION 3: RECEIVING, HANDLING, AND
STORAGE
Selectable ground and test (SG&T) devices are subjected to
complete factory production tests and inspection before being
packed. They are shipped in packages designed to provide maximum
protection to the equipment during shipment and storage and at the
same time to provide convenient handling.
3.1 RECEIVING
Until the selectable ground and test device is ready to be delivered
to the switchgear site for installation, DO NOT remove it from the
shipping crate. If the selectable ground and test device is to be
placed in storage, maximum protection can be obtained by keeping
it in its crate.
Upon receipt of the equipment, inspect the crates for any signs of
damage or rough handling. Open the crates carefully to avoid any
damage to the contents. Use a nail puller rather than a crow bar
when required.
When opening the crates, be careful that any loose items or
hardware are not discarded with the packing material. Check the
contents of each package against the packing list. Examine the
selectable ground and test device for any signs of shipping damage
such as broken, missing or loose hardware, damaged or deformed
insulation and other components. File claims immediately with the
carrier if damage or loss is detected and notify the nearest Eaton’s
Electrical Services & System office.
Tools and Accessories
Racking Handle:
The racking handle is used to drive the racking
mechanism which moves the SG&T device into and out of the
cell. This racking handle is the same one provided with the original
VCP-W Vacuum Circuit Breaker and therefore is not provided as part
of the SG&T device. (Figure 3.1.1)
Figure 3.1.1. Racking Handle
3.2 HANDLING
WARNING
DO NOT USE ANY LIFTING DEVICE AS A PLATFORM FOR PERFORMING
MAINTENANCE, REPAIR OR ADJUSTMENT. THE SELECTABLE GROUND
AND TEST DEVICE MAY SLIP OR FALL CAUSING SEVERE PERSONAL
INJURY. ALWAYS PERFORM MAINTENANCE, REPAIR AND ADJUSTMENTS
ON A WORKBENCH CAPABLE OF SUPPORTING THE SELECTABLE GROUND
AND TEST DEVICE TYPE.
VCP-W selectable ground and test device shipping containers are
designed to be handled by a forklift truck. If containers must be
skidded for any distance, it is preferable to use roller conveyors or
individual pipe rollers.
Once a SG&T device has been inspected for shipping damage, it is
best to return it to its original shipping crate until it is ready to be
installed in the Metal-Clad Switchgear.
When a selectable ground and test device is ready for installation, a
lifting harness in conjunction with an overhead lift or portable floor
lift can be used to move a SG&T device. This could be preferable to
rolling the SG&T device on the floor using self-contained wheels.
If the SG&T device is to be lifted, position the lifting device (lifting
straps should have at least a 1600 lb capacity) over the SG&T. Stand
a safe distance away from the device while lifting and moving.
Figure 3.2. Lifting 150 VCP-W-SG&T
