background image

4

Instruction Book    IB182312EN   June 2016   www.eaton.com

50/75/150 VCP-W

Selectable Ground and Test Device

SECTION 1: INTRODUCTION

The purpose of this book is to provide instructions for receiving and 

handling, storage, installation, operation and maintenance of 150 

VCP-W Selectable Ground and Test Devices. This selectable ground 

and test device is designed to be used in existing Westinghouse, 

Cutler-Hammer, or Eaton Type VCP-W metal-clad switchgear.

Type VCP-W selectable ground and test devices are designed for 

insertion into the breaker compartment to gain access to the primary 

stationary contacts. It provides convenient means to:

1. Ground a circuit for maintenance work;
2. Apply potential for testing; and/or,
3. Access both bus and line circuits for “phasing out” tests.
4. Depending on customer specification, key interlocks may be 

deleted. Line/Load and Phase labeling may be optionally provided.

 CAUTION

BECAUSE OF THE UNIQUE APPLICATION AND VAST VARIETY OF SYSTEM / 

USER REQUIREMENTS, SPECIFIC SAFE OPERATING PROCEDURES FOR THE 

USE OF THIS DEVICE MUST BE DEVELOPED BY THE USER.

 WARNING

SATISFACTORY PERFORMANCE OF SELECTABLE GROUND AND TEST 

DEVICES IS CONTINGENT UPON PROPER APPLICATION, CORRECT 

INSTALLATION AND ADEQUATE MAINTENANCE. THIS INSTRUCTION 

BOOK MUST BE CAREFULLY READ AND FOLLOWED IN ORDER TO OBTAIN 

OPTIMUM PERFORMANCE FOR LONG USEFUL LIFE OF THE SELECTABLE 

GROUND AND TEST DEVICES.

THESE SELECTABLE GROUND AND TEST DEVICES ARE PERSONNEL 

PROTECTIVE DEVICES, AS SUCH, THEY ARE MAXIMUM RATED DEVICES. 

THEREFORE, THEY SHOULD NOT UNDER ANY CIRCUMSTANCES BE 

APPLIED OUTSIDE THEIR NAMEPLATE RATINGS.

1.1  AVAILABLE 150 VCP-W SELECTABLE GROUND AND 

TEST DEVICES

Refer to Table 1.

Table 1.  150 VCP-W Selectable Ground and Test Device Availability and Interchangeability

Nominal Voltage Class

(kV)

Existing Breaker MVA 

Ratings

Sized For Circuit 

Breaker Compartment 

(Amps)

Rated Short-Time Current

kA / RMS

Symmetrical

Rated Momentary Current

kA / Peak

BIL Capability

(kV)

5

36 / 49

1200 / 2000 / 3000

50

97 / 132

60

7.5

41

1200 / 2000 / 3000

50

111

95

15

23 / 41 / 50

1200 / 2000 / 3000

50

62 / 109 / 130

95

Summary of Contents for 150 VCP-W-SGT





















Reviews: