EN
EN-19
TIP: If one of the clips from the bumper bar is open, the bumper bar is fragile. Do not
allow your child to lean on it.
IMPORTANT: Before use always check whether the bumper bar is securely fixed to the
frame.
IMPORTANT: After assembly shut all poppers again.
Storage basket
The EasyWalker QTRO is supplied with the seat and the storage basket already fitted. To
remove the storage basket, open all Velcro fastenings and poppers on the front and rear
of the storage basket. To reattach the storage basket, put the tapes and Velcro through
the buckle around the frame and close the tapes and Velcro fastenings (image 18). The
storage basket is accessed easily using the two zip fastenings.
Using the EasyWalker QTRO
IMPORTANT: Avoid dangerous situations. Always use the wrist band attached to the pushbar.
Take your child out of the EasyWalker QTRO if you go up or down stairs, escalators
or steep hills.
IMPORTANT: Do not use the EasyWalker QTRO if any part is broken, torn, incomplete or
does not seem to be functioning correctly.
IMPORTANT: The EasyWalker QTRO is not designed for use when jogging or rollerskating.
IMPORTANT: The rods between the rear wheels are not suitable for standing on. This is
unsafe and can damage the EasyWalker QTRO.
Parking brake
IMPORTANT: Ensure that the parking brake is engaged when the EasyWalker QTRO is
stationary.
Push the parking brake at the back of the frame gently downwards with the foot. Ensure
that the sides of the brake fall into the designated recesses on the rear wheels so that
the EasyWalker QTRO cannot move (image 24). To release the brake on the EasyWalker
QTRO, push the brake upwards with the foot (image 4).
Collapsing and opening out
WARNING: Ensure that all the locking devices are engaged before use.
You can leave the seat and the sun canopy in place on the EasyWalker QTRO when
collapsing and folding out. If using the EasyWalker carrycot or a car seat these must first
be removed.
Position the front wheels with the wheels swivelled and pull the EasyWalker QTRO
backwards slightly so that the front wheels turn forwards. Engage the parking brake and
turn the sun canopy upwards. Click the red safety catch (located on the right hand side
of the frame) upwards. Standing behind the pushchair, squeeze the unlocking handles on
both sides of the push-bar. Move the push-bar downwards while keeping the unlocking
handles pushed in (image 26 + 27). Close the locking hook on the right hand side of the
frame around the designated pin (image 28).
To open out the EasyWalker QTRO, release the locking hook and pull the EasyWalker
QTRO up by the push-bar. The EasyWalker QTRO will unfold by itself. If you hear a double
click then the EasyWalker QTRO has unfolded correctly. Check whether the red safety
catch on the right hand side of the EasyWalker QTRO is in the locked position.
TIP: The four wheels and bumper bar can be removed to make the folded pushchair more
compact.
!
