background image

EN

EN-21

IMPORTANT: Ensure that the parking brake is engaged when the EasyWalker QTRO is
stationary.

IMPORTANT: Before use always check whether the bumper bar is securely fixed to the
frame.

The EasyWalker QTRO has four seat settings. If you are using the seat for the first time,
all zips on the sides of the seat will be closed, as will the clips above the seat on the
back. This is the most vertical position. You can set the seat position by releasing or
closing the clips on both sides above the seat (image 34). You can change the position of
the seat further by completely opening or closing the zips on the sides of the seat (image
35 + 36).

IMPORTANT: Open or shut the same zips on both sides of the seat.

TIP: For the comfort of your child, support the seat back with your hand when opening or
closing the zips.
TIP: Ensure the zips are always either completely open or completely closed.

There is an integrated UV screen with an UPF protection factor 10 under the sun canopy.
This is secured with two buttons under the sun canopy. Release the buttons and fold the
screen outwards in order to protect your child against sunlight (image 37).

Changing position of the footplate

You can change the position of the footplate so that your child can sit or lie more
comfortably. To change the position, push the handle under the footplate (image 38).
Adjust the footplate to the desired position and release the handle.

Rain cover

The EasyWalker QTRO is supplied, as standard, with a rain cover for over the seat with
sun canopy. Place the rain cover so that the stitching rests on the front and rear edge
of the sun canopy and the wide red edge comes to the height of the underside of the
footplate. Attach the rain cover with Velcro (image 39).

TIP: The rain cover has reflective stitching so that you are visible to other road users in
the dark and during bad weather.

IMPORTANT: The rain cover has ventilation holes on the sides. These ensure fresh air can
circulate so do not block them.
IMPORTANT: Do not let your child sit under the rain cover unnecessarily. Ensure that your
child does not get too hot.

Assembling the EasyWalker carrycot

Content

22 Contents of the box
22 Assembling the EasyWalker carrycot
22 Using the EasyWalker carrycot
24 Rain cover
24 Mosquito net

Summary of Contents for QTRO
















Reviews: