EN
EN-23
Lift up the carrycot using the grips in the sun canopy and under
Now pull the hand grip (under foot-end) backwards so that the clips open and, at the
same time, push the clips over the connection tube. Let go of the hand grip.
The clips shut by themselves around the connection tube (image 7).
WARNING: Check that the carrycot body or seat unit attachment devices are correctly
engaged before use.
WARNING: A small child has very sensitive skin. Never leave your child in the EasyWalker
DUO in the sun without the sun canopy on.
the foot-end.
Slide the hooks (under head-end) over the tube at the front of the frame above footplate.
!
!
IMPORTANT: Always be careful with open fires and other heat sources in the vicinity of
the EasyWalker QTRO and your child.
The EasyWalker QTRO and the EasyWalker carrycot have been carefully created
with comfort, safety, ease of use and design in mind. The EasyWalker QTRO and
the EasyWalker carrycot meet European safety standards. Assembly and use are
comprehensively explained in the instructions. To get the most out of your EasyWalker
QTRO please follow the instructions provided.
However, you are advised to regularly check your EasyWalker QTRO and EasyWalker
carrycot. It is recommended that you have your EasyWalker QTRO serviced at the shop
where you bought it once every two years. If you have any doubts about the state of
one or more of the components in the interim, contact the shop where you purchased
the item. They will assess the EasyWalker QTRO and the EasyWalker carrycot and carry
out simple repairs. The shop owner will always contact the manufacturer should there be
serious problems.
IMPORTANT: Keep your proof of purchase and the instructions safely.
IMPORTANT: The serial number of the EasyWalker QTRO can be found on the inside
of the tube on which the left rear wheel is attached.
The serial number of the covers and other fabric parts can be found on the fabric labels.
The serial number for the EasyWalker carrycot can be found on the fabric label.
Regularly clean the EasyWalker QTRO. Use a damp cloth for this and a mild cleaning
solution if necessary. The swivel wheel holder and the rear wheel axles regularly get
dirty. Take the wheels out of the holder or axle on a regular basis and clean with
lukewarm water. Ensure that all parts are dried thoroughly and oil the axles lightly
with oil or silicone spray before replacing the wheels. Protect the foam on the push-bar
against friction and sharp objects. Avoid exposing the EasyWalker QTRO to extreme
temperatures.
Fabrics used on the EasyWalker QTRO and EasyWalker carrycot are removable and
can be washed in the washing machine. Never bleach, dry-clean or wash the fabrics at
over 30 degrees and never dry in the tumble dryer. Before washing always remove the
fastenings, foam and plastic or metal parts. Always refer to the washing label on each
part The EasyWalker QTRO is not resistant to salt water so do not use it in the sea.
During wet weather always use the rain cover supplied for the seat with the sun canopy
or the carrycot. If the EasyWalker QTRO and the EasyWalker carrycot are wet due to
cleaning or rain do not collapse but leave to dry opened out in a well ventilated room.
This prevents the formation of mould.
