EN
EN-18
WARNING: Check that the carrycot body or seat unit attachment devices are correctly
engaged before use.
5-point harness
WARNING: Always use the 5-point harness as soon as your child can sit unaided.
WARNING: Always use the crotch strap in combination with the waist belt.
The EasyWalker QTRO seat is supplied, as standard, with the shoulder straps in the
highest position. You can set the shoulder strap to a lower position so that smaller
children are seated more comfortably (image 12). To do this, click the shoulder straps to
release them from the crotch strap and take the shoulder pads off. Open the zip at the
top of the back support. You can now take the shoulder strap through one of the other
openings. Click the shoulder strap back onto the crotch strap and shut the zip at the top
of the back support.
The EasyWalker QTRO seat is supplied, as standard, with the waist strap in the smallest
position. You can set the waist strap to a larger position so that larger children can be
seated more comfortably (image 13). To do this, take the waist strap out of the loop on
the base of the seat.
You can use the sliding buckles to make the shoulder, hip and waist straps tighter or
looser (image 14).
TIP: The tapes on the rear of the seat that go around the frame, just above the rear
suspension are part of the harness and provide extra comfort and security for your child.
Ensure that these are always closed around the frame.
Sun canopy
In order to attach the sun canopy place it, with open attachment clips, inside the upper
recess in the seat fabric, exactly between the two caps behind the frame (image 15).
Click the attachment clip shut.
To remove the sun canopy click and release the attachment clip on the sun canopy on
both sides of the push-bar. You can now remove the sun canopy from the frame.
TIP: Give yourself enough space. Before assembling or dismantling, release the poppers
around the recess in the seat fabric.
IMPORTANT: After assembly shut all poppers again.
IMPORTANT: A small child has very sensitive skin. Never leave your child in the
EasyWalker QTRO in the sun without the sun canopy on.
Bumper bar
Place the bumper bar with opened clips on the frame in the lower recess in the seat
fabric and shut both clips (image 16). To remove the bumper bar, open the clips and
remove the bumper bar from the frame. You can also release the bumper bar on one side
to make getting in and out easier for your child. Open the clip on one side and swivel the
bumper bar to open (image 17). Swivel the bumper bar back to close and close the clip
on the frame.
TIP: Give yourself enough space. Before assembling or dismantling, release the poppers
around the recess in the seat fabric.
!
!
!
