55
75
74
Página 10
22. Loosen knob on head support
bracket, insert head support and tighten
knob securely.
23. If a Tilt Table (TT) model was ordered
follow steps 23-27, remove the 6 bolts from
the back of the upper body support pad.
24. Place pad onto unit as shown. Line
up the 2 middle holes on the pad with the
bracket on the unit, insert 2 bolts and
tighten snug.
23
24
22
Página 29
Upper Body Support Pad
74. To adjust the upper body support pad
height, loosen knob.
75. Depress spring button and adjust to
desired position. Tighten knob securely.
Head Support
76. To adjust the head support depth,
loosen the knob on the back of the headrest
and slide into desired position. Tighten
securely.
77. To adjust the head support angle,
loosen the ratchet handle and place into
desired position. Tighten securely.
78. To adjust the head support height,
loosen the knob on the back, move to
desired position. Tighten securely.
76
78
77
MPS and Supine
Tilt Table
Tilt Table
