25. Using a hex wrench, insert 2 lower bolts
into the holes on the pad. Tighten snug.
Note: Use the 2 holes on the bracket to
access the lower holes in the pad.
26. Place head support/push handle
bracket into support tube as shown.
27. Line up 2 holes on the bracket with the
2 upper holes on the pad. Insert bolts and
tighten all 6 bolts on the pad securely.
Página 11
26
27
25
Página 28
Calf Pad with Knee Strap
68. To adjust the calf pad with knee strap,
loosen knobs on each side. Position
fore/aft and up/down to the desired setting.
Tighten securely.
Multi-Adjustable Knee Pads
69. To adjust the multi-adjustable knee pad
height, loosen the ratchet handle. Adjust to
desired position. Tighten securely.
70. To adjust the multi-adjustable knee pad
depth, loosen the knob. Adjust to desired
position. Tighten securely.
71. To adjust the multi-adjustable knee pad
position, loosen knob and rotate to desired
position. Tighten securely.
Independent Adjustable Calf Pads
72. To adjust the independent adjustable
calf pad depth, loosen the knob. Adjust to
desired position. Tighten securely.
73. Remove bolts and position as desired to
adjust calf pad height. Tighten securely.
68
71
70
69
73
72
Tilt Table
Tilt Table
Tilt Table
