9
3) Put the mounted stand at a pointed place ( a plain ground ) for further use.
C.
Take Out the Machine ( See Figure 5 )
( Figure 5 )
1. Hex bolt and nut 2. Pressing board 3. Frame 4. Fixing plate of material roller
5. Material roller ( parts) 6. Pallet of the packing box
The machine is fixed onto the bottom pallet with 4 bolts, and covered by a plastic
bag to keep dust and moisture out.
1)Loosen and take down the bolts and nuts.
2)Lift up the machine from the pallet to separate them.
D. Fix the Machine on the Stand ( See Figure 6)
1) Lift up the frame and put it onto the special stand. ( See illustration of
Figure 6)
2) After that, open the covers on both sides. Join the frame and the stand with
the socket hex head screws and washers taken from the accessory box, then
