6
roller 12. Supporting sleeve of material roller 13. Front working table 14. The
right and left supports of material roller 15. Adjustable foot wheel 16. Positioning
plate of the front working table 17. Supporting beam 18. Rear working table 19.
The upper support of material roller 20. Rear top roller 21. Front top roller
V. Figure of Control Panel
1.
Indicator of cold mounting
2.
LCD of temperature
3.
Temperature-regulating
knob
4.
Continuous / Intermittent key
5.
Hot / Cold Laminating key
6.
Forward / Reverse key
7.
Single / Double Roller key
8.
Speed-regulating knob
9.
‘Ready’ indicator
10.
Indicator of hot laminating
Note: This machine doesn’t have the function of Continuous Reverse. If you need it,
please use the pedal switch.
( Figure 2 )
·
The control panel of this machine is located in the up right front, with a digital
display screen. The switches include a Motor’s Speed-regulating Knob; a
Temperature-regulating Knob; a Forward / Reverse Key; a Single / Double Roller
Heat-up Key; a Continuous / Intermittent Key, and so on. Turn or press any of them,
you can gain the function as marked.
·
Press the key for Cold, the indicator of cold mounting is on; but if press the key for
Hot, the Heat-up light is on. And when the set temperature has been reached, the
