http://www.easy2access.net
Easy2Access A/S
®
Easy-903 G2 Pin Code lock
18
5.
Installation
Installation of the outside unit.
1.
Select the right rubber gasket for the
outside unit according to the door
thickness, and put the rubber gasket
to the back of the outdoor unit.
2.
Make sure the UP marks are on the two
sides of the spindle, instead of top
side.
3.
Make sure the deadbolt is retracted.
4.
Insert spindle through the 21mm hole.
5.
Insert the connector and wire through
the bigger upper hole (Dia: 17mm).
6.
Insert the two upper fixing posts
through the small upper holes on the
door and the bottom post through the
bottom hole.
Installation of the inside unit.
1.
Put the rubber gasket to the back of the
inside unit
2.
Connect the 2 sets of wires and insert
all the wires into the wire hole on the
door.
3.
Make sure the arrow mark on the
spindle is turning upwards. The lock will
not work if this is turning in a wrong
position!
4.
Insert the spindle through the spindle
tube of the indoor unit.
5.
Gently finish joining the outdoor and
indoor units together, ensuring all
fixing posts are aligned properly. Make
sure the cables are not jammed by the
door.
6.
Turn the handle to test the operation of
