http://www.easy2access.net
Easy2Access A/S
®
Easy-903 G2 Pin Code lock
22
Enter #2 + the master PIN code + # (with the Green LED blinking) + 0
to cancel this functionality.
When the Green LED blinks, this functionality ceases
to work.
▲
Important Note:
When this functionality is applied, any wrong PIN code
access attempts on five consecutive occasions will immobilize the lock for 5
minutes. During this period, any button on the outside unit will cease to
function.
7.
Unlocking from the Outside Unit
The power button on the outside unit is used to trigger the night-view light
beneath the PIN code keypad. This night-view light will last 3 seconds with no
operation following, but will not turn off until any operation on the keypad is
accomplished.
Fully lift up the outside sliding cover and directly enter one existing outside PIN
code + # (or + *, or + the PWR button). The door can be opened after the motor
is done operating (the motor makes a small sound while operating). Be aware
that several attempts opening the door while the motor is operating can damage
the motor
Opening the lock with key
Opening with a lock is designed only for emergency solutions and must not be
used on a daily basis.
The key is turned ¼ from vertical to horizontal position. Turn the key back to
starting position after opening the door and the door is locked again.
Older versions of Easy-903 G2 is opened by turning the key 3-4 times
counter-clockwise, or until a resistance is felt. The door is locked again by
turning the key 3-4 times clockwise or until resistance.
Important
•
When a resistance is felt it is important to stop, the cylinder can become
damaged if continuing.
•
If the door is opened with a key, the door must be locked with the key again
in order for the electronic to function.
