http://www.easy2access.net
Easy2Access A/S
®
Easy-903 G2 Pin Code lock
21
deleted they can only be changed.
Changing the Master Code
Enter * 0 + the old master code * new master code * new master code *. The
master code is now changed to a new master code.
Permanent Unlocking Mode
This mode is resembles the situation with a key. The door is open when unlocked
and locked when locked with a pin code.
For activating the permanent unlocking mode enter
#1 + one master PIN
code + #
(with the Green LED blinking)
+ 1
. When the Green LED blinks again
and one long beep is heard, the lock gets into Permanent Unlocking Mode, and
user can turn down the handle to unlock without the need to enter any PIN code.
Example: #1123#1
Be aware that the lock in permanent open mode will stay open after unlocking
this until the “Automatic locking mode” is activated again.
To lock the door in permanent open mode, enter a pin code.
Important Note:
Permanent Unlocking Mode can be an insecure setup, as it can
easily be forgotten to lock the door. Unless you’re sure it’s 100% necessary and
safe, otherwise it’s strongly recommended not to apply this functionality.
Automatic Locking Mode
This mode will activate automatically locking of the door lock after 5 seconds.
Enter
#1 + one master PIN code + #
(with the Green LED blinking)
+ 0
to get
the lock back to Automatic Locking Mode. When the Green LED blinks again and
one long beep is heard, the lock gets back into Automatic Locking Mode, and
user cannot unlock from outside before one correct PIN code is entered.
Example: #1123#0
▲
The original factory set mode is Automatic Locking Mode.
Anti Malicious Operation Setup
Enter #2 + the master PIN code + # (with the Green LED blinking) + 1
to trigger Anti Malicious Operation functionality.
When the Green LED blinks
again and a long beep is heard, this functionality is triggered.
