http://www.easy2access.net
Easy2Access A/S
®
Easy-903 G2 Pin Code lock
20
6.
Make sure the master codes are saved; they are the only codes that can add
and delete other codes.
6.
Outside Unit Programming
Adding the pin codes
There can be TEN sets individual PIN codes set from the outside unit. The Set id
number ranges from 0 to 9. The original factory-set system PIN Code is
123
.
The PIN code can be 1 digit up to 10 digits. For the lock Easy-903 G2 G2 code
with 6 digits is not available as they are reserved for auto generation of codes.
A.
ADD the Master 1 PIN code
：
Enter *0 + 123 + *(Green LED blinks) + New PIN
code + *(Green LED blinks) + New PIN code again + *
When the green LED blinks and one long beep is heard, the operation
succeeds; if the Red LED blinks, the operation fails.
B.
ADD the Master 2 PIN code
：
Enter *1 + the 0 set PIN code + *(Green LED
blinks) + New PIN code + * (Green LED blinks) + New PIN code again + *
When the green LED blinks and one long beep is heard, the operation has
succeeded; if the Red LED blinks, the operation failed.
C.
ADD the User PIN code
：
Enter *2~9 + one of the master PIN codes +
*(Green LED blinks) + New PIN code + * (Green LED blinks) + New PIN code
again + *
When the green LED blinks and one long beep is heard, the operation
succeeded; if the Red LED blinks, the operation failed.
Notes: 1.“+”is only a follow-up mark, not a functional button.
2. The 0 and 1
st
set PIN codes are the master PIN codes of the lock.
Deleting the pin codes
Enter *+ the set id number of the PIN code which should be d one
master PIN code + # (Common confusion: It is the id number not the pin code
that is entered).
When the Green LED blinks, the deletion operation succeeded; if the Red LED
blinks, the operation failed. I.E. If we want to delete the PIN code with id number
2: Enter *2 + the master PIN code + #.
▲
Note: The master PIN codes (always id number 0 and 1) cannot be
