2019 - Easy Lights GmbH
36
4.6
Assembly
/
Disassembly
4.6.1
Assembling the lamp
When assembling the lamp, make sure it is vertically oriented. Prior to connecting the
mains cable to the mains, first plug the connection cable from the power supply unit into
the socket of the lamp mast. Do not attach any objects to the lamp or its components. Do
not drill holes into the lamp nor screw any brackets to the mast or lamp head.
Do not touch any live parts such as connector plugs, sockets or electrical components when
the lamp is on. Prior to servicing or adjusting the lamp, always disconnect it from the mains.
Do not expose the lamp to water!
4.6.2
Disassembling the lamp
Disconnect the lamp's mains cable from the mains socket. Then disconnect the connection
cable of the power supply unit from the socket of the lamp mast. Return the lamp head to
its initial position. Exclusively use the original packaging for transporting the lamp and its
accessories.
4.7
Maintenance and care
/
Copyright
4.7.1
Maintenance and cleaning
Clean the lamp surfaces with a moist cloth and an appropriate non-acidic, mild detergent.
Do not use abrasive tools like cleaning pads with scratchy surfaces, scouring pads, brushes
or similar. For cleaning the glass surfaces of the lamp use a moist cloth, only.
4.7.2
Copyright
All rights of these instructions for use are reserved to Easy Lights GmbH. These instructions
for use are only addressed to the lamp operator and his personnel. The instructions in this
document must not be copied, distributed or disclosed to third parties, neither in parts nor
in full. All violations involving copyright can result in legal action.
