2019 - Easy Lights GmbH
44
5.2.3
Connecting the lamp to the mains
Figure J
Take the power supply unit with the connection cable (16) out of its packaging.
Take the mains cable (17) out of its packaging.
First connect the low-voltage plug (33) of the power supply unit's connection cable (16) to
the dedicated socket at the lower part of the mast (12). Then connect the mains cable (17)
to the power supply unit (16) and to the mains socket. After approx. 5 second the lamp will
be ready for use. During this period, all sensors will be calibrated and the lamp’s electronics
will be adjusted. The top height of a height-adjustable desk will be determined automatic-
ally. No further adjustment is required.
Easy Tandem has two power supply units and two connector sockets on the bottom part of
the mast.
33
12
