2019 - Easy Lights GmbH
39
5.1.3
Assembling the baseplate with levelling slider and mast
Figure E
Remove the packaging from the baseplate (11).
Remove the packaging from the lower part of the mast (12).
Take the following parts out of the packaging:
-
1 countersunk screw M 10 x 30 (22)
-
1 countersunk screw M 4 x 25 (23)
Place the lower part of the mast (12) on the baseplate (11) at the drillhole positions
according to the drilling pattern. On the bottom side of the baseplate, insert the M 10 x 30
countersunk screw (22) into the countersink and screw the baseplate to the lower part of
the mast (12). The screw head must be flush with the baseplate. To fixate the mast and
prevent it from turning on the baseplate, also screw the M 4 x 25 countersunk screw (23)
into the lower part of the mast from the bottom side of the baseplate.
11
23
12
22
