EASTMAN Blue streak II 629X, Instruction Manual And Parts List

Page: 23 / 40

19
Form C-1555
Specialty Machines
Plastic Master Model 627PM/629PM
Eastman's Plastic Master has been specifically designed
by Eastman's engineering group to eliminate the fusing of
synthetic materials such as plastics, PVC, vinyl, and rein-
forced vinyl. Exclusively formulated Plastic Master Fluid is
applied to a special wave blade by articulated arms. Gravity
carries the Plastic Master Fluid down the blade and cools
as it cuts. The Plastic Master option is available for dual-
speed machines.
For more information on the Eastman Plastic Master 627PM/
629PM, call your Eastman authorized dealer or Eastman
factory direct.
Figure 18. Plastic Master
Micro Fog Model 627MF/629MF
Eastman's Micro Fog is designed for the same purpose as
the Plastic Master, but is more comprehensive. The exclu-
sive Micro Fog and a 90-120 psi compressed air hose sends
a mist of coolant/lubricant behind the knife and out through
special slotted wave blades to penetrate every layer of cloth
and eliminate the conditions that cause fusing. Micro Fogs
are only available with dual-speed motors, 6" standards,
and in 1-1/8 or 1-1/4 stroke only. Special waterproof belts
are available for use on this machine. The amount of spray
may be regulated through a valve on the device.
For more information on the Eastman Micro Fog 627MF/
629MF, call your Eastman authorized dealer or Eastman
factory direct.
Figure 19. Micro Fog