67
Phone:(910) 392
‐
2490
Fax: (910) 392
‐
2123
416 Landmark Drive
Wilmington, NC 28412
www.easterninstruments.com
SCREEN GUIDE
Every HMI page has a unique name that includes the previous page name combined with a de
‐
scrip on of the current page. A period separates the names. When the DCE is
fi
rst powered
on, or when you press the so
‐
key labeled MENU, the TOP page is displayed.
TOP
TOP is the Main Menu Screen. There are six bu ons on the TOP page. They are RUN, CAL,
COM, SET, I/O and ADV. Press the RUN bu on to go to the TOP.RUN page. This is the normal
display mode. Press the CAL bu on to go to the TOP.CAL page. This is where the DCE calibra
‐
on is performed (comparable to analog electronics Sta c Calibra on). Press SET Bu on to go
to the TOP.SETUP page. This is used to perform the DCE site calibra on. Press the I/O bu on
to go to the TOP.I/O page. This is used to set up the digital inputs and outputs. Press the ADV
bu on to go to the TOP.ADV page. This page is where advance func ons such as batching and
PID are set
‐
up. In the lower corner you will also no ce an indicator displaying whether you
currently have a Flash Card Installed and if you have any alarms currently ac vated. In the
upper right corner you can access a Help Menu.